The brake rotor is the bulky metal disk that the pads press against to barricade the vehicle.
Rear brakes typically one grip approximately 20 percent of the braking in any vehicle. The essential assistance of the rear brakes is to prevent the vehicle from "nose-diving," which happens when the front stop lunges toward the ground and the rear of the vehicle raises up. On account of of the decrease of handle, the rear brakes are commonly overlooked and not properly maintained. There is one more anomaly between the front and rear brake systems, the rear brake rotors are thinner and typically annex less of a tolerance for wear than the front brake rotors.
Instructions
1. Loosen, on the other hand conclude not remove the rear lug nuts.
2. Jack up the rear of the vehicle and secure it with jack stands.
3. Remove the lug nuts and pull the wheels from the vehicle.
4. Stare at the rear of the brake caliper and place the two caliper bolts. Hang the caliper from a constant suspension Element using the bungee strap. Never hang the caliper by its brake hose as damage to the hose may action.7.
There Testament be one upper and one lower bolt.5. Loosen and remove the two caliper bolts using a ratchet and socket, and pull the caliper from the brake operation.6.
Stare at the rear of the brake caliper bracket, the exorbitant metal bracket that the caliper was bolted to. Allot the two bolts securing to the rear of the revolve hub.
8. Loosen and remove the caliper bracket bolts using a ratchet and socket.
9. Pull the caliper bracket from the trundle hub. Sign that the brake pads Testament come off with the bracket. There is no committal to remove the pads.
10. Stare at the rotor, the comprehensive metal disk, and allot the unmarried screw near the centre.
11. Loosen and remove the rotor screw with a screwdriver.
12. Pull the rotor from the vehicle.
13. Country the latest rotor on the hub. Cause positive to limit the screw gap in the rotor up with the gap in the hub.
14. Tighten the rotor screw with a screwdriver.
15. Corner the caliper bracket and brake pads over the recent rotor and labourer tighten the caliper bracket bolts.
16. Torque the caliper bracket bolts to manufacturer's specifications with a torque wrench and socket. These specifications are listed in the repair manual.
17.Place the caliper over the brake pads and onto the bracket. You may need to compress the caliper using the caliper piston tool, if the caliper does not clear the pads. Follow the instructions included with the tool, as this varies greatly from vehicle to vehicle.
18. Hand tighten the caliper bolts.
19. Torque the caliper bolts to the manufacturer's specifications listed in the repair manual, using a torque wrench and socket.
20. Repeat steps 4 through 20 for the rotor on the other side.
21. Place the wheels back on the vehicle and hand tighten the lug nuts.
22. Lower the vehicle to the ground and torque the lug nuts to the manufacturer's specifications, using a torque wrench and socket. These specifications are located in the repair manual.
23. Press the brake pedal, repeatedly, until the pedal is firm.
