The Miata is a baby, lightweight roadster produced by Mazda. It is a rear-drive van general in autocrossing and course racing due to its near 50/50 weight distribution characteristics. The guideline Miata comes with a five-speed textbook transmission, though, for an fresh value, you can obtain an automatic transmission. To prevent this from happening, replace the windshield trim if it is damaged.Instructions
1. Clean the windshield with Windex before starting. Cherish most roadsters, the Miata has a convertible top. Over epoch, principally provided the exterior trim is not taken concern of, the exterior trim moulding approximately the windscreen can---and will---fade and crack. This can be an eyesore, on the contrary it can besides compromise the seal encompassing the speck of the windscreen allowing bathe, dirt and debris to receive persist the moulding.
You do not want dirt or debris to receive lodged into the pinchweld area or underneath the new molding.
2. Fold the windshield wiper arm up away from the windshield until it locks into a vertical position.
3. Remove the nuts holding the wiper arms in place and pull the wiper arms off.
4. Slide the tip of the trim removal tool between the trim and the windshield. Work the tool all around the outer edge of the windshield until the trim comes off.
5. Install the new trim. The new trim is installed in the opposite way the old trim was removed. Orient the trim so that it fits tightly between the frame and the windshield. You may need to use the removal tool to align and adjust the trim as you move along the perimeter of the glass. Force the trim into place with your hand.
