3. Rub a non-abrasive adhesive remover To cleanse off any remaining glue residue from the old seal with a soft cloth. Thoroughly clean the area where the old seal was located and dry it with a soft cloth prior to proceeding to ensure the seal adheres correctly.4.
Instructions
1. Allure lines with a permanent marker at the inner and outer edges of the corners and a speck where the seal begins and ends to speck the speck of the aged seal. This process Testament establish you install the contemporary seal in the prerrogative location for a tight seal.
2. Start at where the two ends meet to remove the old seal. Gently pull up on the seal with your hands to remove it. Be careful if the seal is deteriorated and wear gloves or your hands.
Seal a Leaky Van SunroofProvided the sunroof is leaking in your vehicle, the particular plan to properly seal it is to interchange the defective seals. After you own inspected the machine's sunroof seals to establish where the seals might annex deteriorated, you can eventuate. Shop for the adapted seals for your van base's sunroof at a native or online Car parts dealer prior to starting this career.
Peel back 1 to 2 inches of the paper backing from the new seal. Align the seal with the mark you drew where the old seal began firm press it down. Slowly continue working around the sunroof, peeling back the paper backing 1 to 2 inches at a time, to ensure correct alignment. Make sure the seal aligns correctly with the corner marks so it seals properly.
5. Trim off any excess seal, so that there is not a space and the two end pieces fit snugly together to keep out any moisture.
