A fuel additive is an alcohol-based substance that helps Disinfected internal engine and engine-related components. Being some additives can blend or "bond" with H2O, they are used To cleanse gone any condensation in the fuel receptacle. On the contrary, many fuel additives are designed To cleanse and restore an engine by removing carbon deposits and debris that has built up encompassing the fuel injectors and valves.
Refill the tank with another bottle of fuel additive immediately after you fill the tank.4. Repeat steps 1 to 3 every week.
Make sure you are adding the fuel additive immediately after filling the tank.
2. Run your vehicle until the gas tank is near empty.
3.
Instructions
1. Unbolted the Gauze receptacle door on your vehicle and pour in the filled bottle of fuel additive.5. Open the oil filler cap on the top of the engine.
6. Pour in one can of Engine Restore brand oil additive. Make sure that you are not overfilling the engine oil. Prior to adding Engine Restore oil additive, you may want to check the oil level by pulling out the oil level dipstick, wiping it off with a rag, replacing the oil dipstick and then pulling the dipstick back out again. Check the oil level. It should be between the two marks on the very end (tip) of the dip stick. If the oil level is at or near the upper mark, do not add the Engine Restore oil additive until your next oil change (make sure whoever changes your oil reduces the amount of normal oil added when refilling by 1/2 quart).
