Convertible plastic windows are subjected to the elements.
Plastic convertible rear windows that accept been subjected to the elements can fog up due to oxidation, soak stains, sunlight fading and heat exposure. Plastic windows eventually lose their pliability (oils and elasticity), suffering dryness and cracking as a aftereffect. Cloudy residue on the plastic windows obscures a Chauffeur's visibility, severely limiting insight and the gate of approaching or passing vehicles. Vehicle owners can restore their plastic windows with patience and a unusual basic tools.
Instructions
1. Arena the vehicle and fix the emergency brake. Up thrust the convertible top and lock it into position. Repeat this growth for the interior side of the window on the other hand operate less polishing extortion.3. Practice the medium-grade of plastic polishing compound to conceive the abutting pass over the window.
2. Don your rubber gloves. Handle a liberal proportions of the coarse-grade compound to the emory paper or abrasive cloth. Eventuate at one purpose of the window, applying power on the surface with Hand-bill motions. Flexing four fingers downward with one ability supplies an much compel over a inconsequential surface environment. Close not employment the heel of the plam to push against the surface. Medium vigour works positive. Polish from one extremity to the other then back again. Wash the absent of the glass with soap and drool, removing all dirt and grime. You can very sponge off the inside of the window. Buff both surfaces dry with a shop rag.
Create not be concerned provided the window appears fogged or hazy; this is residue from the compound, which is common. At this mark, you will be able to see small scratches. Concentrate on removing all scratches with this second pass, using medium-pressure, circular polishing strokes. When finished (inside and out), wipe as much residue away as possible with a shop rag.
4. Use the fine-grade compound for the last round of polishing. Look for any small scratches you might have missed with the last pass. This step will begin to remove the compound residue. Keep polishing in one area until you see some transparency. You may want to alternate between the inside and outside surfaces to complete a large section. Wipe the area clean with a shop rag when finished. Use a micro-fiber towel, and buff the entire surface (inside and out) until you achieve a clear luster.
5. Apply car wax to the inside and outside of the window if you want added protection against water and other contaminants.
