Trucks come with lots of contrasting options, including solid back glass and sliding rear windows, and certified as a slider. While a solid back window offers added security, a slider Testament authorize wind to flow easier throughout the cab, forming driving with the windows down a and comfortable acquaintance. It further allows letter with those in a camper, whether one is mounted on the Motor lorry. Provided you wish to install a sliding back window in your Motor lorry, you can cook it yourself with the maintenance of an assistant and some ability tools.
Instructions
1. Manage the cab doors and advantage the flathead screwdriver to attempt the rubber seal around the back window away from the inside of the vehicle In relation to the out. The flathead screwdriver can push the rubber lip outside, then can be Narcotic approximately the mounting lip to remove the rubber. Constitute undeniable the assistant is holding the glass from the elsewhere while you are pushing elsewhere the seal. Then remove the back glass.
2. Habitat the rope in the rubber seal all over the slider window, leaving at least 12-inches of rope hanging out of the rubber seal. Make sure the rope goes around the entire perimeter of the glass and stays in the channel.
3. Place the window in the window channel on the cab of the truck with the excess rope on the inside of the vehicle. Have your assistant hold the glass in place while you move to the inside of the vehicle.
4. Once you've gone around the entire window, you may have to use the flathead screwdriver to pull some of the rubber seal towards the inside of the cab, just to clean it up a bit.
Start to pull one end of the rope, parallel to the ground, while the assistant pushes the glass in towards the interior. This is going to pull the rubber seal out and around the factory lip, mounting the glass in place.5. Continue to pull the rope around the glass while the assistant follows you, pushing in the window.
