The side look mirrors on the 2002 Toyota Camry fasten to the door with three high studded posts that extend fini the door, into the cabin of the vehicle. The securing nuts and the wiring harness for the electric mirror Engine are abstruse by a triangular cover located inside the door, on the conflicting point of the mirror. Thanks to captivating off the mirrors consists of removing these three nuts and the wiring harness, the case is relatively basic and requires besides mini dogma of automotive mechanics.
Press down on the centre of the wiring harness connector and pull the ends of the connector apart.3. Remove the three nuts that secure the mirror to the door with a 12 mm buried beefy socket and ratchet. Occupation the mirror with one participation while you remove the Ending 12 mm peanut.
To remove the incorporate, pull on it with your fingers. This releases the bitty tabs that mastery the plastic insert onto the door panel.
2.
Instructions
1. Remove the triangular comprehend from the inside door panel. Again, the include is located inside the door, directly antithesis the mirror housing on the out of the door.This keeps the mirror from falling absent of the door and scratching the emulsion on your Camry. Provided you cook not keep a moment person to hold the mirror while you remove the nuts, roll the window down so you can easily reach both.
4. Pull the mirror out of the door and then slide the studs of the new mirror into the door. Be careful not to scratch the paint on your Camry with the threaded studs.
5. Hold the mirror in place while you tighten the nuts onto the studs to the inside door panel.
6. Push the two ends of the wiring harness together until you hear them snap into place.
7. Place the cover back onto the door panel and push on it to force the plastic tabs into the door panel.
