Nearly anyone who owns a automobile needs automotive bodywork done at some mark. Bringing your machine to a target shop can be further expensive, and regularly return days or still weeks to plenary. On the contrary most of the bill in bodywork is absolutely in the labour charges. Grind away the paint in the dent and the surrounding area.3. Apply Bondo over the holes made from the drill and also over the low-lying areas in the dent.
End a dent puller on broad dents to straighten the metal. Drill into the metal of the machine in differing places in the dent; normally 3 to 5 holes Testament elbow grease. Involve the dent puller and gently pull the factor until the dent looks more smooth. It will probably not look perfect.
2. Sand the entire area with a small grinder and rough sandpaper disk. Get down cook automotive bodywork yourself to significantly lessen your costs.
Instructions
1.Allow the Bondo to dry completely.
4. Sand the Bondo with a hand sander/file with 80-grit sandpaper. Sand until the Bondo feels smooth, but don't sand so much that the dent can be felt again. The Bondo is to fill the holes and make the entire area level with remainder of the car again.
5. Use 600-grit sandpaper over the entire Bondo area again. This makes the scratches in the Bondo less apparent.
6. Apply body filler directly over the Bondo. Allow it to dry completely and then sand over it using 1,000-grit sandpaper.
7. Wipe the entire area with a dirt and grease remover. It is now ready for primer and paint.
