Brake failure can aim earnest accidents.
Brake failure is a cold sober hitch that can end a vehicle to animation gone of polity and damage individuals, animals and Belongings. To avoid brake failure, the Branch of Engine Vehicles (DMV) requires brake liners to applicable various guidelines. Failing to applicable these requirements Testament target a vehicle to fail inspection. Guidelines may vary from government to administration, so you should check with your own DMV to see the specific regulations in your area.
Width Requirements
To pass motor vehicle inspections, brake lining must be securely fastened, and can't be broken or loose. With bonded linings, circumferential cracks are acceptable as long as the lining is still secure.
Cleanliness Requirements
According to DMV regulations, brake lining should measure at least 1/16 of an inch on bonded linings and 1/32 of an inch on riveted linings. No lining should be absent anywhere on the brake.
Condition Requirements
Vehicles may fail inspection if brake liners are heavily soiled with foreign material, such as grease, which could impede the functionality of the brakes.
