Swapping elsewhere a factory-installed stereo to a automobile is a casual upgrade. Nevertheless still though installing a stereo is a relatively no problem bother, getting gone the exhausted deck can sometimes be a hitch. Most Volkswagens committal a determinate item to remove the stereo. This object is costly, however whether you're in a bind and you obligation to receive the stereo away now, making your own set of tools is easy to do.
Instructions
1. Place the end of the steel dowel onto the grinder.5. Push the handles in until it releases the side clips that hold the stereo in place. This will cause the stereo to pop out a small amount, which is enough for you to seize the stereo by the sides and pull it out of the car.
Do this for each end of each rod.
3. Bend the rod around your knee, forming a "u" shape in the steel.
4. Place one of each section of doweling into the stereo. There are two vertical holes on either side of the stereo; place the U-shaped tool into the holes so that it forms two handles.
Keep the dowel at a sharp angle--you're going to grind a shallow angle into the dowel.2. Roll the dowel around on the bench grinder, forming a tapered point in the dowel. Don't make a point, but just taper down the rod.
