Install the window switch by plugging in the electrical connectors. Push the window switch into the hole in the door panel and press the rear of the switch down to lock it in place.
There is an access gap in the door employ to cover the crucial into the cylinder. These door handles are either nigrous or painted to match the target.
Instructions
1. Lift the window up completely. Remove the screws from the armrest using a screwdriver. Lift the window switch away of the door panel by prying up rear of the switch and the pulling the switch to the rear, dislodging it in the front. Lift it up and unplug the electrical connectors.
2. Contain the flathead screwdriver between the door panel and the door and pry absent all the trim fasteners from the door on both sides and the backside. Remove the panel. Peel the moisture barrier back exposing the rear of the door.
3. Push the door lock actuator rod retainer off the rod, releasing it from the door knob. Remove the two 10 mm nuts securing the elsewhere door handle to the door. Pull the door handgrip away of the door.
4. Install the fresh door grasp by holding it in compass and installing and tightening the inside nuts. Contain the door fastening rod into the door knob lever. Swing the retainer down and push its lock over the rod.
5. Accommodation the moisture barrier back into domicile. Install the door panel and push all the trim fasteners into the holes in the door. Install the two screws into the armrest and tighten.Exchange the Door Handle on a Chrysler MinivanReplacing the absent door utilize on a Chrysler minivan is a relatively mild and curt repair. The stock has a plastic insert that overlaps the lock cylinder.
