Loosely bolt the bracket onto the frame, using a socket wrench and a bolt supplied with the engine guard utensils.2. Ally the backside of the engine guard against the frame. Secure the sides of the engine guard to the backside of the frame, using the U-bolt or clamp included with the engine guard tools.
Instructions
1. Grasp the engine guard against the front of the frame. Centre the engine guard's upper mounting bracket between the frame's tubes below the motorcycle's steering intellect, which is the tube that the front fork pivots on.Engine guards bestow some Safeguard against a low-speed fall.Engine guards are a banal finery erect on many Harley-Davidson motorcycles, affording a little bigness of Safeguard to the touchy Engine and enhancing the motorcycle's appearance. There are many at variance engine guard variations available to the Harley rider, however most bag a tubular steel bar doodle that bolts directly onto existing mounting points form on the frames of many Harley-Davidson models. For the most component, installation is quite straightforward, on the contrary some engine guard kits can be a bit exceeding complicated than others.
Tighten the U-bolts or clamps loosely, using a socket wrench.
3. Turn the handlebars from side to side to make sure that the engine guard does not prevent the fork from Stirring freely. Loosen the lower mounting clamps or U-bolts and reposition the engine guard if the fork touches it.
4. Tighten all three mounting bolts or clamps completely, using a socket wrench, starting with the upper mounting bolt.
5. Clean the engine guard with an ammonia-based window cleaner to remove any fingerprints or oil. Dry the engine guard with a clean shop towel.
