To enjoy your ATV looking analogous late, get down tint ATV plastic so that it won't crack, peel or fade.
Instructions
1. Remove the plastic parts that are to be painted from the ATV.Portrayal an ATV is disparate than depiciton a van, over ATVs are unreal of plastic rather than phase metal. Most older ATVs are easily recognizable in that of their faded gloss dispute, on account of many persons don't appreciate true distemper ATV plastic. Spraying a can of tint on the ATV plastic may gaze useful when applied, nevertheless the dye Testament probably crack within a month.
Whether the parts cannot be removed, tape off any pieces that you don't thirst covered in whitewash. Disinfected the plastic parts with soap and saturate. Allow them to dry completely.
2. Sand the ATV plastic with 180-grit sandpaper until it is smooth. Use Scuff Magic and a red scuff pad to scrub the entire surface of the plastic. Sand again with 180-grit sandpaper.
3. Clean the plastic with Super Clean Plastic Cleaner by spraying it directly on the plastic and then wiping it off with a lint-free towel. This removes any debris, dust or oil from the surface of the plastic.
4. Apply two coats of Plastic Magic, which seals the plastic and helps primer stick to the surface. Allow each coat to dry completely before applying the next coat.
5. Spray the high-build primer on the surface of the ATV plastic. Allow it to dry and then sand it gently with 320-grit sandpaper until smooth.
6. Apply the sealer to the ATV plastic and then allow it to dry completely. Spray three coats of paint on the surface, allowing each to dry before applying the next coat. Cover with two coats of clear coat and allow it to dry completely before moving the ATV.
