Exhaust tips are where the exhaust Gauze comes absent of the muffler.
Magnaflow mufflers are universal aftermarket mufflers for Motor lorry and cars besides. They grant for smoother flow of exhaust gases extremely as a deeper exhaust note. Do not tape the coffee can to the underbody or to the suspension as the duct tape will tear when the car suspension is compressed or extended during a drive.
1. Drive your car or truck to a clear area where you can work on it. Do not perform any car projects on the road side due to the danger of passing traffic. A garage or covered carport would be the best area to do this project.
2. Place an empty coffee can against the tip of the Magnaflow muffler. The tip will be round and protruding from the back of the muffler. Place the coffee can so that tip hole is flush against the bottom of the coffee can. The top of the muffler exhaust tip should touch the rim of the bottom of the coffee can.
3. Trace around the Magnaflow muffler exhaust tip onto the bottom on the coffee can. Do not worry about marking the tip of the muffler with the marker, stainless steel cleans very easily even from permanent marker marks. Take the coffee can away from the muffler and place it on your work space. Place a nail on a point on the outline and hammer it down, through the metal sheet. Repeat this hole punching along the outline you drew so that the outline is a series of holes.
4. Cut the remaining pieces of metal in the outline with a pair of shop shears. Snip at the metal bits that keep the inner metal circle still attached to the coffee can. Peel the metal away with a pair of needle-nose pliers and then smooth the edges on the coffee can with a hand file.
5. Take the coffee can back to the Magnaflow muffler exhaust tip and slide the coffee can over the tip so that the open side faces towards the back of the car or truck. Tape the coffee can into place on the muffler with duct tape. Wrap the duct tape around the can and onto the Magnaflow muffler itself, so as to connect both. However improvements can also be made, even to Magnaflow mufflers. To make a Magnaflow muffler sound better you can attach a homemade echo chamber with a modified coffee can. The coffee can will slip over the tip of the muffler and bounce the exhaust note sound waves around.
