A functioning machine window Testament aid care for the elements and thieves away.
A defective dynamism window could bring about your 1995 Honda Civic easier to gap into and, hence, a intent for an experienced machine thief. You can appliance the parts from any 1984 to 1995 Honda Civic, CRX, or Del Sol in progression to fabricate the repair.
Instructions
1. Evaluation the effectiveness window fuse. Remove the kick panel located under the steering edge to expose the fuse panel. Advantage the illustration on the kick panel to establish the power window fuse, remove it and see the filament. Moderate provided the filament is broken.
2. Ajar the hood and utilize a wrench to loosen the cynical battery terminal. Remove the cynical battery terminal and fix it aside.
3. Call a Phillips screwdriver to remove the speaker encompass and speaker on the belonging door. It is not chief to remove the speaker from its wires.
4. Unscrew the armrest with a Phillips imagination screwdriver. Remove the armrest.
5. Allot the door trim panel running along top of the interior of the door; where the door meets the backside of the window. Exercise your Phillips intellect screwdriver to remove the retaining screws of the door trim panel. Hire the panel firmly and remove it by pulling upward.
6. Remove the door panel with your hands. The outer path of the door panel is connected with a series of plastic slips. Carefully unseat the clips to remove the door panel. Business the speaker nailed down the speaker gap in the door panel.
7. Locate the window bracket. It is a combination of metal arms holding the window glass in place. The arms form an 'X' shape with the upper right arm attached to the power window motor.
8. Use your hand to disconnect the power window motor relay. Make sure there are no breaks in the wires and the fuses inside the relay are intact. If the relay is broken or does not connect properly with the power window motor it must be replaced.
9. Inspect the swing bolts on the window mounting bracket. There should be a visible amount of grease to lubricate the joints. If the swing bolt joints are dry they may be stuck. Use all-purpose automotive grease to lubricate the locked swing bolt joints.
10. Hold the glass in place and use the approapriate socket wrench to remove the regulator. The regulator is the metal arm holding the bottom of the window glass in place. It is attached to the bottom-most 'X' shaped arms. Remove the regulator.
Replace door panel, door panel trim, armrest, speaker and speaker cover. Replace the negative battery terminal and lower the hood.
11. Use a pencil to mark the location of the gear on the power window motor. Remove the power window motor mounting bolts and remove the motor from the door. Inspect the gear on the motor for grease and lubricate if necessary. If the motor does not work after greasing it must be replaced.12.
