When one spin stud goes, the others entertain additional stress and annex a plausible to rupture too. You commitment to alter the spin stud in your Chevy Silverado as soon as you conceive the stud is broken. It requires some mechanical skill. You further chalk up To possess the equitable tools, some energy and a bad flashback to receive the parts back on the vehicle genuine.
Instructions
1. Get a dewy stud for your Motor lorry. When you moderate the stud on the Silverado, you essential the equivalent vastness stud. GM does constitute a shorter one that does the activity, as deep as the Breadth is the alike. Catch the stud with you to the store whether you don't notice the immensity.
2. Study remain the passenger's seat in the regular cab Silverado for the jack and jacking tools. They're under the second row seat on the passenger's side on the extended and crew cab.
3. Jack up the truck. Some models have disc brakes in the rear and others have drum brakes. If the stud is on a wheel with disc brakes, remove the caliper without disconnecting the brake line and hang it from mechanic's wire. Take off the rotor. Remove the drum for drum brakes.
4. Check behind the wheel hub and see if you can find the head of the stud. If you can, or if you find an opening to line up the stud, skip to Step 5. Otherwise, you need to remove the hub, or get one of the shorter stud replacements and cut off the end of the stud to remove it.
5. Whack the stud on the end with a mallet to drive it out.6. Twist a wheel bolt on and tighten down the bolt with an impact wrench if you have one. As you tighten down the wheel bolt, it pulls the stud through the hub.
If you cut it off, you may need to put a rod on the stud and strike it. Put a new stud in its place. Push so some threads of the stud come through on the front. You'll need to add extra bolts as the stud comes out further.
7. Unscrew the bolts that you used to replace the stud on your Silverado. Reassemble the parts and put on the wheel. Tighten down the nut to finish the job.
