Connect the power cable of a TIG torch to the negative electric terminal of the rectifier or your stick welding box. You can also clamp the welding rod holder, or "stinger," to the TIG torch power tab.3.
Lincoln Electric manufactures a welder (the Invertec V155-S TIG and Stick Welder) that is basically a stick welder with a TIG adornment pack. In that most stick welders bag alternating in fashion (AC, the ahead commodity you must discharge is alter that electrical source to administer happening (DC).
Instructions
1. Connect a rectifier to your AC stick welding box. You call for DC for TIG welding and most stick welders afford an AC potential source. You can, de facto, employment any DC competency source instead of using your box and a rectifier and you conclude not necessitate a rectifier whether you already have a DC stick welder.
2.This stick welder uses a consumable welding rod or stick to associate metal.A stick welder is an electric arc welder that uses an electrical in fashion to melt a consumable welding rod, or stick, into a weld. A Tungsten inert Gauze (TIG) welder uses a non-consumable rod shielded by argon Gauze to melt metal parts, normally episode metal, calm. Experienced welders consent the conversion can be done although you might not be thrilled with the results.
Connect the gas hose of the TIG torch to a flowmeter and connect the flowmeter to a tank of argon gas. Flowmeters are long gas hoses with a gas regulator valve.
4. Strike the TIG torch rod like a match to begin the weld. Rock the torch element to one side and pull back to stop the weld. You will not have an amperage adjustment or an on-off switch.
