Install RAM
Whether your personal computer slows down when you're working with sizeable files or many programs nowadays, you might be able to ameliorate performance by installing additional RAM (Irregular Access Mind - your machine's passing operating fame). These directions Testament drudgery for the majority of machines built in the mid 1990s and following.
Instructions
1. Dispose what benign of RAM you longing, and if your machine has Sufficiently unbarred slots to clutch it. The advanced RAM should match the existing RAM's specifications and configuration.
2.11. Feel or hear retaining clips lock a SIMM into the socket; close the side clips on a DIMM.12. Gently try to pull the module out to ensure it is locked in position.
4. Remove the pc subsume.
5. Ground yourself to the machine with Expert grounding Accoutrement comparable an anti-static wristband or dominance a metal division of the chassis.
6. Remove any cards or internal components cardinal to convey yourself unobstructed access to RAM sockets.
7. Pick up your SIMM (unmarried in-line memorization module) or DIMM (dual in-line memory module) by the ends without touching pins or chips.
8. If adding a SIMM, find the notched end and turn the SIMM so that it is parallel to the existing RAM card(s). Insert the SIMM into the socket at a 30-degree angle. If adding a DIMM, insert the DIMM straight in so that it is perpendicular to the motherboard.
9. Use slight pressure to keep a SIMM from backing out while rotating the module to an upright position perpendicular to the motherboard.
10. Make sure the small holes on each side of a SIMM fit into holders.
Shut down the personal computer and permit it plugged into the surge suppressor.3. Disconnect all peripheral devices, such as the scanner, from the pc.
13. Replace all internal components.
14. Leave the cover off and reconnect the monitor, keyboard and mouse.
15. Turn on the computer.
16. Check the amount of RAM by right-clicking the My Computer icon in Windows and choosing Properties. On a Mac, use the About this Macintosh command in the Apple menu.
17.If you don't see the right amount of RAM, turn off the computer and try "reseating" the SIMM or DIMM (take it out and put is back in) and reboot. If that doesn't work, call a technician.
18. Shut down the computer and disconnect the peripherals again.
19. Replace the cover and reconnect all the peripherals.
