A Chrysler Hemi is an eight-cylinder engine named for its hemispherical combustion Hospital ward. Chrysler has untrue three generations of this engine type, with the third procreation entering Industry in 2003. A Hemi 5.7 engine typically appears in big Dodge vehicles and is a general possibility in Dodge RAM 2500 and 3500 pickup trucks. The aqua pump in these vehicles is on the front of the engine and you must remove distinct components to access it.
Connect the cable for the negative battery terminal with a socket wrench and refill the radiator with coolant. Start the engine and check for coolant leaks.
Filter the coolant into the withdraw pan and transform the filter plug.
2. Abode a square ride ratchet into the gap on the belt tensioner arm and rotate the tensioner clockwise to Proceeds the cestuses tension. Remove the guide cestuses and Proceeds the tensioner.
3. Disconnect the shroud for the cooling fan and remove the cooling fan with a socket wrench. Detach the coolant-recovery bottle and the windscreen washer bottle. Remove the compressor for the air conditioner and brace for the alternator.
4. Remove the loafer pulleys and cestuses tensioner with a socket wrench. Detach the hoses on the radiator and heater.
5. Disconnect the mounting bolts for the water pump and remove the water pump from the engine. Install the new water pump and torque the mounting bolts to 18 foot lbs. with a torque wrench.
6. Perform steps 2 through 4 in reverse sequence to complete the water pump installation.
