Using a torque wrench Testament relieve you properly tighten bolts
It happens to house mechanics all the extent. You're replacing a effects and you dig that putting it back on is not as no problem as enchanting it off. Bolts, such as the manifold bolts in your Kia Sedona, extremity to be tightened to Correct levels when you are reinstalling them. Attain the Correct tightening procedures and torque ratings for the intake and exhaust manifold in your Kia Sedona.
Instructions
1. Always double-check the torque rating for accuracy.
Tighten the bolts to between 15 and 22 foot-pounds of torque.
3. Tighten the upper intake manifold bolts to between 11 and 15 foot-pounds of torque. Double-check the torque rating on each bolt after you are finished to verify the rating.
4. Tighten the exhaust manifold bolts to between 20 and 24 foot-pounds of torque. Tighten the bolts in a crisscross pattern, starting in the center, to prevent the other bolts from loosening. Loosely turn Everyone bolt to secure the manifold, when installing the intake manifold bolts. The manifold must be secure before you can correctly tighten the bolts.2. Use the torque wrench to tighten the lower intake manifold bolts first.
