1. Unpack the supercharger. Effect that you posses all the parts that you obligation for the installation.2.
Adding a supercharger to your vehivle's engine can add additional horsepower. Compared to a turbocharger, a supercharger is normally less expensive and easier to install yourself. A supercharger is basically a mechanically driven compressor used to deliver pressurized air to the inlet manifold.Instructions
Install the oil filter hose onto the supercharger's empty becoming. Lay a hose clamp on it and conceive trustworthy the clamp doesn't interfere with the brackets.
3. Situate the supercharger on the automobile with the oil drain hose going straight down. It is held on with four bolts.
4. Bolt the supercharger loafer meeting onto the supercharger.
5. Attach the intake elbow to the supercharger.
6. Install the elbow going from the fender to the inlet.
7. You may demand to drill a gap for the air sensor. The sensor should fit along the elsewhere bend. Test that the sensor won't interfere with anything in the engine by reason of this is a tight fit. Once you acquire the placement of the sensor, advantage a microscopic drill bit to drill the initial gap and proceeding up in bit immensity until you nearly compass the correct size to fit the sensor. Capitalization a case to Stop the gap and assemble it the correct size for the sensor. You don't want air to slip out through the sensor, so make sure that the sensor fits securely.
8. Clean out the inside of the tube to ensure no debris gets into the supercharger.
9. Attach the elbow to the flex tube coming off the MAF.
10. Between the elbow and the supercharger's inlet tube is a piece of rubber hose. Slip all the hose clamps onto the end of the inlet so that they can slide onto the hose once everything is assembled.
11. Hook up the elbow and clamp it down. Your supercharger is now installed.
