Release the clutch pedal.6. Push the clutch pedal to the floor and hold it.
1. Fill the clutch skillful cylinder reservoir with brake fluid.
2. Acquire someone pump the clutch pedal diverse times, then influence it to the floor.
3. Set the clutch slave cylinder on the side of the transmission, toward the front of the machine.
4. Advantage the wrench to unbolted the bleeder valve located on the side of the clutch slave cylinder. Open it only enough for fluid and air to escape.
5. Close the bleeder once fluid stops running out.When you depress the clutch pedal, the 1993 Agree's clutch slave cylinder uses the hydraulic vigour from the masterly cylinder to push in the shift fork and retract the clutch from the flywheel, allowing you to shift gears. Provided you push the Correspond's clutch pedal and it does not fully disengage the clutch, or provided the pedal feels also spongy, bleed the operation.
Instructions
7. Open the bleeder valve until fluid stops running out. Close the bleeder valve.
8. Repeat the steps several times until the clutch pedal no longer feels spongy.
9. Start the vehicle and make sure that it shifts properly.
