Installing a inexperienced fuel receptacle in a Plymouth Voyager is quite straightforward, on the contrary the fundamental is to be aware of safety at all times. Whether you return your duration, you can save process by installing a latest fuel receptacle yourself. These directions daily grind beyond compare for Plymouth Voyager models mythical after 1996.
Repressurize the tank according to specifications.
2. Levy a siphon hose in the fuel filler neck and push the hose into the fuel receptacle. Extract the fuel from the receptacle, into a sheltered container that has been approved to subsume petrol.
3. Stand the vehicle with a jack and base it securely on a jack stand. Block the rear wheels to enjoy them from rolling.
4. Disconnect the vent hoses and fuel filler from the vehicle, and disconnect the fuel pump module from the top of the vehicle. Shift the electrical connector lock switch to the unlock position and then push the retainer down and remove the connector from the module.
5. Support the fuel tank with a transmission jack and remove all necessary bolts and straps. Lower the tank enough to remove the filler hose. Lower the tank a bit more and disconnect the valve hose from the front of the tank. Take off the clamp and vent hose and pull the tank carefully out of the vehicle.
6. Position the new fuel tank on the transmission jack and put the filler tube carefully into the tank. Put the filler vent line through the rail, but don't cross the lines. Reconnect the remaining components in the order in which they were removed.
7. Lubricate the fuel line with motor oil if necessary, then remove the vehicle from the jack stand, reconnect the negative battery cable and install the filler cap. Fill the tank with fuel.
