Modify the fuel pump on your Honda vehicle.
The electric fuel pump on your Honda is located inside the fuel cistern. Most models care an access door underneath the rear seat cushion. This docent is based on a Honda Civic, which is correlative to other models. Provided your specific pattern does not arrange an access door, you Testament hold to lower the fuel cistern to benefit access to the fuel pump.
Instructions
Relieve the Fuel System Pressure
1. Unplug the fuel pump relay located endure the glove box or under the dashboard.
2. Dawning the engine and let it stall.
3. Plug the fuel relay.
4. Remove the fuel filler cap.
Remove the Fuel Pump
5. Remove the rear cushion. On some models you may include to remove a cross bar from the floor.
6. Unscrew the access door from the floor using a Phillips screwdriver.
7. Unplug the fuel pump electrical connector on top of the fuel vat.
8. Disconnect the fuel lines quick-connect Trimmings figure the fuel tank by urgent the lock tabs and pulling the plastic connector embodiment the becoming.
9. Twist the fuel receptacle unit locknut paper using Honda spanner wrench 07AAA-S0XA100 or homogenous item (clock the Gratuity incision and Funds).
10. Lift the locknut from the vehicle and lift the fuel pump/sending unit.
11. Discard the imitation gasket and O-ring.
12. Remove the geriatric fuel pump from the meeting.
18. Mount the cross bar if your particular Honda model is equipped with it.19. Re-Install the rear seat.
14. Install the fuel pump/sending assembly in the tank and lock the assembly locknut using a new gasket and O-ring. Make sure the marks on the pump assembly align with the marks on the fuel tank.
15. Connect the fuel lines.
16. Plug the fuel pump electrical connector.
17.Screw in the access door.
Install the New Fuel Pump
13. Mount the new fuel pump in the pump/sending unit assembly.20. Tighten the fuel filler cap.
