Van speaker boxes prevent speakers from rolling approximately or hanging by their wires. Speaker boxes Testament besides protect speakers from loosening their wires and poor their sound. In direction to constitute your own speaker box, be prepared to invest at least 5 hours, though it is a relatively elementary assignment.
Instructions
1. Finish how enormous the box Testament entail to be. Make sure the speaker Testament be able to fit in the box and cook up persuaded that the box would be able to fit into the Timber or door of the machine.
2. Divide the box for the speaker with a table axiom, with the wood pieces incision to measurements taken in System 1. Locate heighth of the blades to the aphorism by having the tips of the blade equitable partly up to the board. Chop two pieces for the sides that Testament be smaller or the equivalent vastness as the top and bottom, depending on the size of the speaker.
3. Measure the front of the speaker. The diameter of the circle should be cut into the front board. The back board will need a small square cut out in order for the wires to go through the back.
4. Test the fit of the speaker and assemble. Mock the box and make sure that it is the way you want it. Sand and finish the box. Put putty over the screw holes. Let it dry for several hours. Sand the box until it is smooth (sand in a round motion).
5. Glue wood together. Leave to dry for an hour. Drill the screws in the holes, then re-glue on the insides to fill in the cracks.
6. Brush off the pieces of wood using an air compressor or brush. Pre-drill the screw holes. You will drill coarse-threaded screws into the holes after gluing.
