The door panels on a GMC arrange a habitat for you to rest your arm, a spot to Celebrate your window and lock controls, and very a hand-hold to pull in the door. They too camouflage the unattractive internal components in the door from opinion. However should you ever devoir to receive to these parts for repair or prolongation, you'll get to select off the door panel to receive to them. In this example, the project vehicle is a 2009 GMC Messenger, nevertheless the course is agnate for other vehicles further.
Remove the bolt underneath the power-window switch panel using the 3/8-inch ratchet and socket. Then remove the bolt located in the armrest handle with the ratchet very.3.
Unplug the wiring from the back side of the window-switch panel by hand and set the switch panel to the side.
2. Set the nylon panel-removal tool between the plastic bezel around the door handle and the door panel and use it to pry the bezel off the door.
Instructions
1. Agape up the door and roll down the window. Corner the nylon panel-removal factor between the power-window switch panel and the arm rest and use it to pry the panel up and free it from the clips holding it in place.Pull the door panel from the base to release the clips holding it to the door. Work your way around the door panel until all of the clips are off the door and the panel is just suspended by the window ledge. Lift the door panel off the window ledge and take it away from the GMC.
