Whether you holding crack charge of your Honda Conform, it Testament last to pace for many miles. Effects of this funds resolving problems, such as a corroded or damaged radiator, as soon as they occur. Whether you bear some mechanical skill, you can save chicamin by replacing the radiator yourself. Here's change the radiator in the 1998 to 2002 mould Honda Agree.
Instructions
1. Loosen the plug on the backside of the radiator and withdraw the engine coolant into a resealable container.
2. Remove the upper radiator hose and lower radiator hose. Provided your Honda Acquiesce is equipped with an automatic transmission, disconnect the automatic transmission transaxle cooling lines. Put the radiator cap on very loosely and start the engine. Allow it to run a few minutes, then turn it off and top off the engine coolant, if necessary. Put the radiator cap on securely.
Remove the block brackets on the upper radiators and cushions and lift the radiator up and gone of the engine compartment.
4. Unfasten the clips or screws that connect the cooling fan to the radiator and connect them to the recent radiator.
5. Install the late radiator and reconnect all engine components in the reverse array in which they were removed. Conduct the valve on the thermostat housing a half turn, and set the heater to the "Full Hot" position.
6. Fill the new radiator with a mixture of half engine coolant and half distilled water, squeezing the hoses to force out air. Once you see a steady stream of coolant, close the valve.
7. Plug the lines and radiator Trimmings and empty the tubes into a seperate, resealable container.3. Unhook the radiator cooling fan electrical connectors.
