Whether your RV refrigerator has suddenly stopped working, chances are you duty a current cooling unit. Being RV cooling units are the most expensive constituent of an RV refrigerator to alter, confirm that the complication is the cooling unit by testing your refrigerator's selector switch Issue and influence switch for problems. Once you've driven that a original cooling unit is needed, you can save a appreciable extent of check by installing the different cooling unit yourself.
Instructions
1. Slide the refrigerator outside of its Private room in the RV, so that it much stands upright. Remove the screws from the evaporator fins and the burner meeting with a Phillips-head screwdriver. Pull back on the insert to remove it.
2. Deposit down a substantial dropcloth, and deposit the refrigerator on the dropcloth so that the door is against the cloth and the exposed cooling unit is facing the ceiling. Takings gone the broken cooling unit and peel off the ancient thermal mastic remaining in the refrigerator box.
5. Seat the new cooling unit into the refrigerator box, pressing down with firm pressure To admit the thermal mastic to bond. Secure the cooling unit with screws in the fins, top and sides. Custom a wood rasp to case outside excess foam until the new cooling unit fits securely into the refrigerator box with the fins sitting flush against the evaporator tubing.
4. Cut off a corner of the new bag of thermal mastic. Apply the thermal mastic in 1/2-inch beads on all of the exposed tubing by squeezing with medium pressure from the bottom of the bag.
3. Remove your dissimilar RV refrigerator cooling unit from its box. The cooling unit is surrounded by foam that can be shorten down to produce a custom fit inside your RV refrigerator box. Replace the cover on the refrigerator box by tightening the screws on the fins and burner assembly. Stand the refrigerator up and place it back in its cabinet inside the RV.
