The Chevy Silverado has been a habitual occupation Motor lorry for generations on the contrary bounteous recently has establish a situate in the extra informal Chauffeur's garage. Upgrading the stereo action in the Chevy Silverado requires removing the front of the sprint and a sporadic basic tools. Swapping gone the debilitated stereo for a modern attitude unit gives you preferable sound and upgraded features.
Instructions
1. Accommodation your hands in the upper go corner of the sprint, above the steering turn, and firmly pull the panel until the clips enter on to disengage. Live on pulling until you achievement access to the lustrous switch mechanism and pop it free lunch of the sprint with your fingers.
2. Pull the upper right corner of the panel until the remaining clips are paper and look for a wire attached to the right side. Not all Chevy Silverado trucks include this wire; if yours does, disconnect and remove the panel from the truck.
3. Move the levers on each side of the radio to the down position and pull the stereo assembly out of the dash. Slide the new stereo into the GM mounting adaptor and connect the harness and antenna to the back of the radio.5. Set the stereo mounting assembly into the dash and lift the levers on each side to the locked position.
Unplug the wires behind the radio and let the wires hang from the opening in the dash.4. Connect the wiring harness adaptor and GM antenna adaptor to the original wires.
Turn the radio on and verify the controls and speakers are working properly. Reconnect the wires to the back of the dash panel and pop it into place.
