Placing a silencer on the limitation of your exhaust pipes Testament compose your motorcycle yet also dummied up.
The mark of an air exhaust silencer is to convey your motorcycle a yet quieter sound. These silencers fit on the tips of the exhaust pipes on your motorcycle, and are lined with news that dampens sound. Reduce a three inch square outside of the pad of steel wool.2. Slide the steel wool into the tailpipe until the steel wool is approximately an inch from the end of the pipe.
The counsel is specifically designed to absorb the sound waves produced by your motorcycle exhaust development, and you can either buy a silencer or shape your own Homewards with a hardly any supplies and tools.
Instructions
1. Proceeds assorted pads of steel wool and expand the pads to 8 inches.Use a drill to make holes in the tailpipe. Make four sets of holes that are directly except each other.
3. Take the galvanized wire and slide it through each of the four sets of holes. Tie the galvanized wire. This puts pressure on the steel wool so that it retains its needed shape.
4. Cut a piece of galvanized cloth down until its diameter is half an inch bigger than the hole in the tip of the exhaust. Use your pliers to pull the piece of cloth into the tailpipe.
