You can pick up replacement hub and bearing assemblies from many auto-parts stores.
Instructions
1. Loosen the rear lug nuts.Interchange the Rear Circle Bearing on a '96 EclipseWhen spin bearings wear absent, you initiate to training infrequent bellow and vibration while driving. The rear bearings in your 1996 Mitsubishi Eclipse are built into a hub and bearing meeting that is not designed to be disassembled. This makes replacement elementary, owing to you won't extremity a bearing puller or press to transform them.
Lift the revolve off the ground and help the vehicle with a jack stand. The lift speck is honorable ahead of the trundle on the backside path of the intent panel. There is a tiny dent on Everyone side.
2. Remove the trundle. Provided your Eclipse is equipped with anti-lock brakes, unbolt and remove the velocity sensor. It is extreme the rotor and has an electrical connection.
3. Remove the brake assembly. If you have disc brakes, unbolt the caliper and slide it off the rotor. Suspend it with a piece of wire so you don't stretch the brake hose. Pull the rotor off the hub, and the toothed speed sensor wheel if you have one. If you have drum brakes, pull off the brake drum. If your car has anti-lock brakes, pull off the toothed speed sensor wheel further.
4. Unbolt the hub and bearing assembly. There is a large nut in the center and four bolts behind the hub. Install the new assembly, torquing the bolts to 54 to 65 ft-lbs. Tighten the hub nut to 188 ft-lbs. of torque. Reinstall the brakes.
5. Attach the wheel and hand-tighten the lug nuts. Lower the car and finish tightening them.
