Transform the Brake Pads on a 2002 Chrysler Motorcar
The 2002 Chrysler vans were among the fundamental models to benefit at odds types of calipers. Your motorcar may end Teves or TRW calipers, which can adjust the system of changing brakes slightly disparate depending on the type. This can application to any 2002 example minivan, including the Troop, Town and Society or Voyager. Research with your mechanic before you jab working on the brakes yourself.
Instructions
1. Loosen the lug nuts on the front or rear wheels--whichever head you are changing the pads on. Stand that neb of the vehivle and bed it on jack stands. Employ the parking brake and remove the wheels.
2. Siphon elsewhere 2/3 of the brake fluid from the crackerjack cylinder reservoir using a syringe, a vacuum pump or a turkey baster; beget definite the siphon belongings hasn't been used for anything before. Discard the fluid as per your limited laws.
3. Disinfected off the brake assemblies with aerosol brake cleaner. End a drip pan to accept the residue and dispose of it properly.
4. Compress the caliper piston into the Muzzle with a C-clamp. Install both brake pads onto the caliper bracket and anti-rattle clips for TRW calipers. On Teves calipers, install the inner pad into the caliper and fully seat it into the piston bore, then install the outer pad into the bracket.11.
6. Remove the brake pads from the caliper bracket whether the brakes end TRW calipers. On Teves calipers, remove the outer pad from the bracket and the inner one from the caliper; the inner pad is connected to the piston bore through a retaining spring.
7. Hang the caliper by the strut spring with a strong wire while you prepare the new brake pads. Never let the caliper hang by the brake hose.
Installing New Pads
8. Remove the guide pin bushings, inspect them for damage and replace them if needed. Lubricate the bushings with multipurpose grease and install them.
9. Apply anti-squeal compound to the back of the brake pads in the areas where they come in contact with the caliper and piston.
10. This Testament justification fluid to enter the masterly cylinder; dash off certain it doesn't overflow and siphon absent enhanced whether needed.5. Disconnect the brake caliper from the CD by removing the anti-rattle spring with a Apartment lodgings screwdriver and the caliper's handle pin bolts. TRW calipers appliance bolts requiring a guideline socket wrench, while Teves caliper bolts wish a hex socket.
Reconnect the caliper onto the steering knuckle and tighten the bolts to 35 ft. lbs. Install the anti-rattle spring, hooking the end over the caliper's bracket tab.
12. Reconnect the wheels and lower the car once you've changed the pads on both brakes.
13. Pump the brake pedal multiple times to seat the brake pads.
