Removing a drop-in liner from a Toyota Bedstead is no sweat with the support of a bosom buddy.
Most Toyota pickup trucks come with a inventory Bedstead liner, which helps protect the Motor lorry Bedstead from life scratched or damaged while hauling massive goods. Bedstead liners are commercially available as a spray-on on sealant or a drop-in lining that must be secured to the bed---the type that most Toyota trucks acquire. Owing to spray-on liners are scarcely applied to Toyota beds, the steps below outline the Emigration of liners of the drop-in Category.
Control the screws provided you are planning to alter the liner.2. Blop the Bedstead's tailgate and remove the corner screws that secure its inadequate portion of lining.
Instructions
1. Remove the screws attaching the lining to the Motor lorry Bedstead, using a Phillips screwdriver. On Toyota trucks, these are typically inserted on the top sides of the Bedstead's walls and aloof below the rear window of the cabin.Pry up the side of the lining that hangs over the tailgate's wall and remove the entire piece.
3. Pry up the edge of the main bed liner by inserting your fingers in the space between the end of the bed and the tailgate. Use a flat-head screwdriver to pry up the liner, which may be difficult. Lift the lining from the bed's end and slowly move toward the walls.
4. Apply force with the help of a friend to lift the liner up and out of the bed. Use even force and pressure when lifting the liner out so that you don't damage the Toyota's paint or finish.
