3. Unplug the oxygen sensor wiring located on the forward section of the exhaust from the sensors using your hands. Unbolt the forward section of the exhaust from the exhaust manifolds with the 3/8-inch ratchet, extension and sockets.4.
1. Grounds the F-150 so that it's on a common surface with the emergency brake locate. Lift the Motor lorry using the jack and deposit it on jack stands so that all four wheels are off of the ground.
2. Unbolt the rear chop of the exhaust from remainder of the exhaust action using the 3/8-inch ratchet, room and sockets. Unhook the exhaust hangers on the rear cut of the exhaust using your hands, then slide the rear incision outside from the rear of the Motor lorry. Unbolt the Centre abbreviate of the exhaust from the forward shorten of the exhaust with the 3/8-inch ratchet, amplitude and sockets and pull the exhaust down and gone from the truck.
The exhaust transaction on a 2000 Ford F-150 gives the engine gasses a regulate method from the engine to the back of the Motor lorry. The types of bends in the foundry exhaust can restrict horsepower, and installing a replacement exhaust step can not sole lift the horsepower output, on the other hand further the torque also. Changing the exhaust in a 2000 Ford F-150 takes a unusual hours to conclude, nevertheless it can be done Homewards with minimal tools.Instructions
Lift the replacement exhaust up into the bottom of the Ford and bolt it to the exhaust manifold using the 3/8-inch ratchet, extension and sockets. Plug in the oxygen sensor wiring using your hands. Bolt the middle section of the replacement exhaust to the forward section using the 3/8-inch ratchet, extension and sockets, then attach it to the exhaust hangers using your hands.
5. Lift the rear section of the replacement exhaust up over the rear axle and hang it on the exhaust hangers with your hands. Bolt the rear section of the exhaust to the middle section using the 3/8-inch ratchet, extension and sockets.
