Reinstall the outer engine cover and tighten all three bolts with an Allen socket.6. Remove the oil filler cap from the left side of the motor.
Instructions
1. Commencement the Engine and let it sluggish for five minutes to glowing the oil. This Testament assist the oil remove completely. Conclusion the Engine after five minutes and turn the ignition switch off.
2. Put an oil pan under the Engine and unscrew the bleed plug with a socket wrench. Own the oil to empty and reinsert the filter plug when the oil flow has reduced to a thin trickle.
3. Remove the right-side engine cover to access the oil filter cover. Unscrew all three mounting bolts from the outer engine cover using an Allen socket and pull the cover away from the motor.
4. Unscrew the pair of bolts that secure the oil filter cover to the motor with an Allen socket and pull the oil filter cover away from the motor. Pull the oil filter element out of the motor. Wipe away any spilled oil with a shop towel
5. Insert a new oil filter element into the motor and reattach the oil filter cover. Secure the cover by tightening both mounting bolts with an Allen socket.
Changing your V-Star's oil as effects of a popular perpetuation routine is a decisive Component to control your Yahama cruiser roadworthy. Unfortunately, the 1998 V-Star 650 is not equipped with a spin-on oil filter, so the owner must partially disassemble the Engine to convert the paper filter Component. While this may sound complicated, the Engine's side incorporate is secured by three bolts that are easily removed. Once the side encompass is off, replacing the oil filter is quite mild and Testament not returns added than a hardly any minutes to achieve.Place a funnel into the oil filler and pour up to 2.5 quarts of oil into the motor. Remove the funnel and wipe away any spilled oil with a shop towel. Reinsert the oil filler cap.
7. Start the motor again and let it idle for five minutes to warm the fresh oil. Stop the motor after five minutes and hold the V-Star upright. Check the current oil level through the sight glass on the left side of the motorcycle. The oil level should be at or near the center of the sight glass. Add oil into the motor to raise the oil level as necessary.
