The crankshaft sensor on the Chevrolet Cavalier 2.4 is located in the Centre of the side of the block, fair-minded above the oil pan and above the oil filter. It provides a locution complete the ignition module, which the personal computer then uses as a reference to calculate the position of the crankshaft and engine rpm. The vehicle Testament normally flow whether the crankshaft position sensor malfunctions, however it Testament break poorly. Elevate the vehicle, using the floor jack, then advice it with jack stands.2. Unplug the wiring harness connector by pulling the tabs away from the plug, then pulling the plug off the sensor.
The Cavalier may or may not inauguration once you shut it off after the sensor malfunctions.
Instructions
1. Remove the negative battery cable and fix it aside, ensuring that it doesn't touch metal.Remove the retaining bolt, then pull the sensor off the engine.
3. Lubricate the new O-ring with engine oil, then slide it on the sensor. Reinstall the sensor and tighten the retaining bolt firmly. Plug in the wiring harness connector. Lower the vehicle off the jack stands using the floor jack. Reconnect the negative battery cable.
