The Saturn SL2 has gained its popularity in that it is rust resistant and priced economically. There is hardly any mistrust that these cars are built with individuality in genius; on the other hand, there Testament come a location in age when you Testament occasion to alter the starter. After checking all receive relays and fuses, and reaching the Result that the starter does in reality committal replacing, you can deed forward with the project and hold it finished in approximately an generation and a half.
Instructions
1. Disconnect the balky battery terminal and put the circle chocks persist the rear tires of the van.
2. Lift the van using the van jack and city a jack stand under the frame of the van fast to the jacking site. Elevate the jack stand up to the frame.
3. Remove the shield, provided contemporaneous on your car, by pulling the pin away from the starter with the pliers.
4. Tag the wires on the starter and the solenoid using the marker and masking tape for proper placement when you put the new starter on. Disconnect the wires using a wrench to carefully remove the nuts.
5.6. Put the new starter in place and loosely install the bottom bolt so it's easier to maneuver the starter to insert the top bolt. Tighten the bolts using the socket and ratchet.
Remove the bolts from the starter using a ratchet and socket. You will need to use the extension on the upper bolt. Pull the starter away from the engine. Reconnect the wires to the starter according to the way you had them marked and tighten the nuts with a wrench.
7. Replace the starter shield if you took one off and push the pin into place with the pliers. Remove the jack stand from under the car and lower the car back to the ground.
8. Reconnect the negative battery terminal and tighten the nut with a wrench. Start the car to test the installation of the new starter.
