When you push down on the brake pedal of a Masda 6, this initiates the braking manner to mail hydraulic brake fluid into the wheels, which in turn applies impulse to the calipers and rotors forcing the Mazda's wheels to cutoff. Over generation, the brakes on a Mazda 6 Testament want to be replaced due to Day-to-day wear and tear.
Instructions
1. Grassland the Mazda 6 on consistent ground. Country a vehivle jack under the front frame of the Mazda 6. Lift it off the ground.
2. Remove the lug nuts on the front Chauffeur's side turn using 4-way tire iron. Fix the lug nuts aside and pry the mounted spin unpaid from the Mazda 6.
3. Use the socket wrench set to attach the bolts, and use pliers to attach the clips.7. Assemble the caliper back on the rotor.
Remove the caliper. The caliper is a pinching device that clamps to the rotor and the front axle. The caliper will be attached by three bolts. Remove the bolts with a socket wrench set.
5. Remove the brake pads from the caliper. The brake pads are attached by clips and bolts. Use the socket wrench set to remove the bolts, and use pliers to remove the clips.
6. Attach the replacement brake pads to the Mazda 6's caliper. Remove the ABS brake line hose. The hose can be pulled freebie with your help. Tuck the hose safely gone atop the spin's front axle.4.
Attach the ABS brake line hose back onto the caliper. Use the socket wrench set to tighten the bolts and secure the caliper.
8. Mount the wheel back on the front axle. Tighten the lug nuts back in a criss-cross pattern to evenly distribute torque.
