Reinsert the bulb socket into the assembly by turning it clockwise. Reinstall the assembly into the wagon cargo area with the bolts.
The tail light, brake headlamp, rear turn vocable and reverse headlamp bulbs are located in the identical housing. Much, replacing a bulb involves accessing the housing from the Timber or wagon contents world. Sometimes, the bulb is accessed from the exterior. Changing the bulb can be accomplished by closest some mild steps.
Instructions
Sedan
1. Airy the Timber and gate elsewhere the plastic Toadstool nuts, push pins, and then the plastic include over the lamp housing. Pull the carpet away and remove nuts and washer assemblies, and the lamp assembly. If the lens cover has Phillips-head screws visible from the outside, access the bulb assembly from the exterior by unscrewing the screws and removing the lens.
2. Remove the bulb socket for the expired lamp by turning it counter-clockwise and then pulling it out of the lamp cluster assembly and into the trunk. Remove the expired bulb from the socket and insert the new bulb. From the exterior, remove the bulb only and not the entire socket.
3. Reinsert the bulb socket into the assembly by turning it clockwise. Reinstall the assembly into the sedan trunk with the nuts and washers. Push the carpet back and re-install the plastic cover. From the exterior, simply insert a new bulb and re-attach the lens cover.
Wagon
4. Open the tailgate and remove the bolts from the lamp housing. Carefully pull the assembly from the wagon.
5. Remove the bulb socket for the expired lamp by turning it counter-clockwise and then pulling it out of the lamp cluster assembly. Remove the expired bulb from the socket and insert the new bulb.
6.
Replacing a bulb can encompass accessing the housing from the Timber or wagon freight nature.In that of generation, it's possible that at some purpose soon your automobile Testament desideratum To possess a burnished bulb replaced. You should proof headlamps, tail lamps, brake lamps, the high-mounted brake light, turn signals and reverse lamps on a general cause to establish they are operable.
