A machine parked on an incline can roll downhill, forward or backward provided the parking brake is not place or not working properly, or whether the machine is not braced against the curb. Come next these no problem steps when parking your machine on a hill with or without a curb.
Instructions
With a Curb
1. Paralell grounds however break off within six inches of the curb.
2.9. Put the car in the proper gear, reverse, low gear or park.10.
3. Establish the parking brake.
4. Situate the motorcar in the Correct gear, reverse, low gear or park.
5. Turn off the switch.
Without a Curb
6. Parallel park as in the previous section.
7. Turn your wheels sharply to the right. If the car should roll, it will roll away from the flow of traffic.
8. Set the parking brake.
Brace the wheels against the curb. To brace your automobile when parking downhill, turn your wheels toward the curb and manage forward slowly until the trundle is against the curb. To brace your motorcar when parking uphill, turn your wheels sharply absent from the curb and back up slowly until the rear of the tire is against the curb.
Turn off the switch.
