5. Turn the ignition switch to the "Off" position and test the remote by pressing the "Lock" or "Unlock" button, verifying that the doors do lock or unlock.
The remote is substantial on account of not single does it lock and unlock the doors, it again arms and disarms that foundry alarm when you cleared or hurried your vehivle doors. Recent remotes are available from any Hyundai dealer. While they Testament programme it for you, you can accomplish it yourself and save a programming bill.
Instructions
1. Allot the fuse panel under the sprint on the Chauffeur's side of the car. Just below it is the control module for the factory alarm system. Open the cover on the alarm system control module and locate the memory switch inside.
2. Verify that the switch is in the "Off" position; if it is not, switch it to the "Off" position. This is important for the system to understand what you want it to do when you move to the programming mode.
3. Insert the key into the ignition of your Sonata and turn the key to the "On" position. Wait for 60 seconds, then move the memory switch inside the control module to "Set."
4. Depress and hold the "Lock" button on your remote for one full minute. This allows the remote and the control module to convey and sync. Release the "Lock" button and turn the memory switch in the control module back to the "Off" position.
Programme Keyless Entry Remotes in a Hyundai SonataThe keyless entry step in your Hyundai Sonata is bit of the plant alarm step. Whether you acquire to alternate a disoriented or damaged remote, reprogramming Testament be all-important.
