There is a bolt on the door that's along this line. Unbolt it using the 3/8-inch ratchet and socket to release the bottom part of the vent window.3. Unscrew the two Phillips screws in the doorjamb on the angled side of the vent window using a Phillips screwdriver.
Provided the vent window in your motorcar is broken, it can be constant with the hold water tools.
Instructions
1. Unscrew the door panel from the door using the Phillips screwdriver. Pull the panel off to expose the inside of the door.
2. Make an imaginary line vertically down the edge where the vent window meets the full window.
Remove a Vent Window on a AutomobileWhen smoking was bounteous public and air-conditioning wasn't affordable, machine manufacturers used to create cars with vent windows in the corners of the front window environment To admit additional ventilation into the cab. Over day, the manufacturers corner veered gone from this development to a cleaner-looking one-piece window, however some of those older cars are much all over.Then roll down the main window on the car. Tilt the vent window toward the main window and pull it slowly out of the door, being careful not to damage the original glass.
