Thin MIG wire welds thin metal.
Welding thin metal with a metal inert Gauze welder involves a antithetic welding manner to cinch you effect not blow completed the metal. Blowing on ice Tinplate metal allows molten weld to transfer nailed down the metal chapter. This increases stress on the weld and causes distortion at the aim of blow complete. Using a welding procedure that reduces heat at the thin metal weld Seam eliminates blow through and keeps the metal from building stress or distorting.
Instructions
1. Disinfected the thin leaf metal by running a wire brush over the length of the weld Seam. Make certain no corrosion, dirt or tint remains on or approximately the weld.
2. Pull expansive the side door of a MIG welder. Secure a .023 spool of MIG wire spool inside the MIG welder. Lasting the welder's side door.
3. Turn on the MIG welder. Attach the MIG welder ground clamp to an environment of the thin metal elsewhere from the cleaned weld Seam. Move the tip of the MIG wire 1/8 inch down from the first tack weld. Pull and hold the MIG gun trigger for another one second to place a second tack weld. Continue welding the thin metal by moving 1/8 inch and welding one second to finish the weld joint.5.
Settle on a welding helmet.4. Site the wire extending from the gratuity of the MIG gun at the center of the thin metal weld joint. Pull and hold the MIG gun trigger for one second.
Allow the weld joint to cool for 30 to 45 minutes before handling or cleaning the thin metal.
