1. Remove the full of years door panel by removing the Phillips screws in the door handgrip, in the pocket at the backside of the door, at the end the door handle, in front of the speaker, at the top near the mirror and in the centre of the backside on the carpeted shorten of the door panel. Apply a Apartment lodgings screwdriver to pop off the bright incorporate and to pry absent the electric authority panel that houses the window and door lock controls. The door panels in an S-10 may must replacement as they hour. Door panels are effortless to convert and can be done in less than an date.
Instructions
The Chevrolet S-10 is a bitty pickup Motor lorry that is no longer in Industry. One of the most typical inconsequential pickups for aftermarket and custom Motor lorry enthusiasts, there are latest aftermarket accessories yet existence developed for the S-10 nowadays. The S-10 is a beneficial Election whether you are looking for a Motor lorry to customize. Pull the panel off of the door by pulling a backside corner up and then working your idea along the border of the panel on the backside and both sides. There are plastic clips connecting the panel to the door that Testament pop elsewhere. Lift the door panel up, reach behind it to unplug the wiring harness connecting the wires to the electric controls and the panel should be removed from the door.
2. Place the electric control housing inside the empty slot on the panel for the housing. Press the housing down until it snaps into place. Make sure the plug for the wiring is hanging down underneath on the back side of the panel. Hold the panel near the door and plug the wiring from the door into the plug under the electric control housing.
3. Slide the door handle through the door panel as you hang the door panel from the top of the door near the bottom of the window glass. Let the door panel hang down. Work your way around the sides and bottom of the door and press the plastic clips into the door until each one snaps into place.
4. Replace and tighten all of the Phillips screws that were removed. Replace the light cover over the light.
