Replacing machine struts is an tough effort. The working nature should always be unpaid of hazard, chiefly when it involves a vehicle. To transform motorcar struts, you must remove the shove and brake meeting, too as other parts, such as the tie rod, to accumulation access to the strut intent. It is fundamental you cause the Correct tools to plentiful the employment.
Instructions
1. Loosen the involve plate retaining nuts. You may need the strut extension rod to complete the task. Tighten the strut shaft bolt. Attach the strut mount cover by fastening the cover plate bolts. Catch off the brake rotor, also as the shove bearing.
2. Detach the sway bar end link from the strut. You may need a 2-jaw puller to detach the tie rod from the strut. Remove the tie rod from the steering knuckle. Unfasten the knuckle-attaching bolts from the bottom of the strut body. Remove the ball joint from the knuckle-attaching bolt and the lower control arm.
3. Remove strut shafts using a Torx bit and a strut rod remover. Loosen the strut mount bolts and remove the strut mount. Disengage the jounce bumper retainer. Use a strut extension rod tool to constrict the shaft. Remove the jounce bumper and take off the strut cartridge. The entire strut assembly is off the vehicle.
4. Mount the strut cartridge using a strut cap bolt wrench. Install the jounce bumper and jounce bumper retainer. Lubricate the strut mount bushing with a penetrating fluid. Attach the strut mount. Exalt the vehicle to the felicitous heighth. Properly cornerstone the vehicle while raised. Catch off the tire and revolve meeting. Remove brake calipers without detaching the brake hose. Reinstall the ball joint, tie rod, wheel and brake assembly by reversing Step 2 and Step 3.
