Instructions
1. Actuate which type of emergency brakes your Honda Prelude Testament demand. Emergency brakes typically service by activating the typical braking action on the driving wheels. The emergency brakes for the Honda Prelude benefit the rear wheels, which may acquire CD or drum brakes.The emergency brakes on your vehicle were originally used to block it when the habitual brakes failed. On the other hand, the brakes on a Honda Prelude directly hardly fail, and the emergency brakes are exceeding generally used to carry the vehicle from Stirring while parked. The most accepted source of failure for emergency brakes occurs when they aren't used for a extent of future, causing the brake cable to rust and sieze.2. Bleed half the brake fluid from the crack cylinder and stand the vehicle.
3. Remove the tire and circle meeting with a socket wrench. Remove the brake drum whether commenced. Provided you include rear CD brakes, disconnect the caliper mounting bolts with a socket wrench and lift the caliper meeting outside from the brake rotor. Suspend the caliper meeting with mechanic's wire so that it does not pull on the brake flex hose. You can now remove the caliper assembly and brake pads.
4. Unfasten the caliper bracket mounting bolts with a socket wrench and remove the caliper bracket from the brake rotor. Remove the rotor retaining screws with a socket wrench and pull the brake rotor straight off the wheel mounting studs.
5. Thread two 8 x 1.25mm bolts between the rotor and wheel mounting studs with a Phillips screwdriver if the rotor is seized in place. Tighten the screws two turns at a time until the brake rotor is released.
6. Install the new brake by reversing the removal procedure. You may need to retract the piston into the caliper with a suitable tool such as a large C-clamp.
7. Refill the master cylinder with fresh brake fluid. Pump the brake pedal to seat the brake pads and ensure you have a firm pedal before driving the vehicle.
