The Mazda Multi-Purpose Vehicle (MPV) is a minivan that uses a serpentine ride girth transaction to aptitude assorted pulley-operated pumps and devices. This band can wear with period, and have need replacement. Assorted engine choices were available for the MPV, however all employ a coincidental region development. The meaningful handle cummerbund on a Mazda MPV can be replaced by the principles backyard mechanic in approximately 20 minutes.
Remove the slackened belt from the alternator pulley circle and the air conditioning compressor pulley rotate, provided relevant. This Testament dramatically loosen the belt, and it can then be removed from the remaining pulley wheels and engine crank pulley. Make a note of the belt's path through the engine.
2. Firmly press the tension pulley arm until there is Sufficiently slack to slide the cestuses from the lazy pulley at the top of the Engine. Proceeds the tension pulley arm.
3.
Instructions
1. Disconnect the battery by turning the beneficial terminal bolt counterclockwise. Levy the terminal aside.4. Pull the loose belt from the engine compartment and replace it with a new unit.
5. Slide the drive belt over the engine crank pulley first, at the center of the motor. Pulley wheels that require torque are grooved, and passing pulleys are smooth. Loop the belt over the water pump, power steering pump, and the emissions air pump. Continue to position the belt over the A/C compressor and alternator, which may become increasingly harder as the belt slack tightens.
6. Press the tension pulley arm firmly and slide the drive belt underneath the idle pulley. Release the tension pulley arm and the belt will tighten around all of the components to the proper tension.
7. Reconnect the battery by turning the positive terminal clockwise into the battery post until it is snug.
