Whether you own a Chevy Silverado and you retain traced an ignition manner dilemma to the distributor, you can interchange the distributor with a hardly any basic tools. The Silverado has assorted engine sizes, and it besides has distributor and distributorless systems in the vehicles from 1999 to 2005. Be definite yours has a distributor rather than an electronic ignition. Here's alternate the distributor.
Instructions
1. Catch off the plastic embrace on top of the engine block with a wrench and hint the Glimmer plug wires to the distributor. You'll pride it at the back of the engine block.
2. Unhook the bad cable from the battery at the side of the engine compartment; carefully pull the spark plug wires off the distributor cap. Speck the parts with a marker to rank the rotor position to the distributor housing and the housing to the engine block during distributor installation.4. Unbolt the distributor hold-down bolt with a wrench and remove the distributor from the engine.
Unscrew the screws from the coil leads from the distributor and the electrical connector at the backside of the distributor, using a screwdriver.3. Loosen the clamps and return off the distributor cap.
5. Install the fresh Silverado distributor, aligning the marks for Correct seating in the engine block. When ordering the distributor, dish out the parts dealer your base, year and engine proportions. You can codification division quantity 22176E from Parts Train for a 4.3L engine.
6. Bolt the distributor hold-down bolt and interchange the clamp on the distributor cap. Connect the electrical connector at the base of the distributor, the spark plug wires and coil leads, and the negative battery cable.
