3. Position the window in place with the help of an assistant.4.
Instructions
1. Wrap the rubber window gasket on all sides of the wrinkle of the fresh sliding window meeting. Arrange certain that you abode the window meeting in the absent track of the gasket. The rubber gasket should fit snuggly environing the window. It may be necessary to use a flat screwdriver to maneuver the last bit of gasket on the edge of the window assembly.
2. Press woven rope into the main sealing groove of the rubber window gasket. Start inserting the rope at the top-center of the window. Make sure that at least a foot of rope is left hanging over the edge of the gasket at both ends of the rope. The rope needs to be inserted into the gasket all the way around the window assembly.
The rear sliding window in the Dodge Dakota is a awesome bag to receive some additional ventilation in the cab. On the other hand whether you employ the Bedstead of your Motor lorry indubitable still it is potential to damage that rear sliding window. Provided the window is cracked or the frame of the window is stooped, it is greater to install a advanced window to amass the glass from cracking away of the frame completely. Installing a original rear sliding window in a Dodge Dakota can be completed with basic share tools.Go into the cab and begin to slowly pull on the woven rope. The sealing edge of the gasket will be pulled into the truck cab and over the metal of the cab. Continue to pull the all the way around the window. It should be difficult to remove the rope because the gasket will create a tight seal between the truck cab and the window frame. Don't be afraid to use a little muscle if necessary.
