2006 Honda CRV
Do-it-yourself concervation of your vehicle can sometimes be a daunting bother (remarkably with a newer imitation machine) and you may wish to allowance the critical thing to the professionals (brakes, etc.) On the contrary, you can save some bread by doing the child's play matters yourself and you may much practise up your confidence to begin tackling some extra crucial repairs.
Instructions
1. Dispose which bulb is burned absent. There are four bulbs in the rear taillight meeting. They are: (1) Turn Vocable, (2) Brake Glowing, (3) Back Up Glowing, (4) Taillight.
2. Acquire a au courant bulb at any Car parts store. You Testament commitment to supply the counterperson with your constitute and replica year. Whether you can, it is a positive fancy to bring the ancient bulb with you just to make sure that you are buying the correct one.
3. Do not apply excessive side-to-side force, as this could damage the two clips that hold the assembly in place.9. Remove the socket with the burned-out bulb by turning it a quarter turn counterclockwise.
5. If the burned out bulb is on the passenger side, locate one (top only) screw cover (the bottom screw does not have a cover).
6. Remove the screw covers carefully with the flat-head screwdriver.
7. Remove the mounting screws with the Phillips screwdriver. The bottom screw on the passenger side is fairly difficult to receive to.
8. Carefully pull the taillight assembly from the rear pillar. Open the tailgate.4. If the burned out bulb is on the driver's side, locate the two (top and bottom) 1-inch-diameter plastic screw covers that conceal the screws that hold the taillight assembly to the body of the CRV.
10. Pull the old bulb straight out of the socket and push the new bulb straight into the socket until it is firmly seated.
11. Reinstall the socket into the taillight assembly by turning it clockwise until it locks.
12. Turn on the lights to make sure that the new bulb is working properly. It can save some time to perform this step now instead of waiting until you have reattached the taillight assembly.
13. Align the two clips that protrude from the taillight assembly with the holes in the rear pillar and push the assembly into place.
14. Reinstall the screws and screw covers.
